JILONG tel-icon,fiber optic splicer,arc fusion splicer,optical fiber fusion splicer,fiber splicing machine +54 1135692774 (24 hours service)

Jilong communication electrode blades are replaced with new ones, check for anti-counterfeiting, did you make them?

Release date 2023-02-07Source: JiLong

Home > News > Product Information >Jilong communic...

Circulation products in all walks of life must use packaging, and the optical communication manufacturing industry is no exception. Quality is the guarantee of the product, and the life of the brand. If the packaging cannot provide effective protection, such as damage, scratches during transportation and storage, or the product is broken due to falling, it is considered that the packaging is harmful to the product. protection is not enough. In addition, in the current e-commerce field, where the channel share is increasing, the product protection performance of packaging is required to be higher. In a longer and more complex logistics chain, ensuring that products reach consumers intact will bring greater challenges to packaging.

At present, the following packages are commonly used in the market, and these packages are obviously not conducive to the protection of electrodes and blades.

Jilong Optical Fiber Fusion Splicer


In order to further optimize the packaging design of Jilong fiber optic fusion splicer electrodes and fiber optic cleaver blades, and reduce product damage caused by logistics and other factors, Jilong has specially upgraded the outer packaging of fiber optic fusion splicer electrodes and fiber optic cleaver blades↓↓↓
 

Jilong Fiber Optic Fusion Splicer Electrode


Optical Fiber Fusion Splicer Electrode
The electrode of the optical fiber fusion splicer is an important part of the fusion splicer, and the discharge welding is completed by the electrode rod. The electrode has a certain discharge frequency limit, and must be replaced when the corresponding discharge frequency is reached. Jilong currently has two types of electrodes, TED-JNG-2 and TED-JNG-5, which are made of imported tungsten steel with high hardness and no deformation. The number of stable discharges can reach 3000-5000 times, and the tail is made of high-temperature resistant insulating material.

 

Optical Fiber Fusion Splicer Electrode


The hard blister design prevents the electrodes from being squeezed during transportation and placement, which can effectively protect the electrodes. Compared with the general soft-sealed bag packaging, this design is more effective in protecting the electrodes. At the same time, the hanging hole design is also easy for the store to organize and display.
 

Jilong Fiber Optic Fusion Splicer Electrode


If you are using Jilong's welding machine, it is very important to choose the original Jilong electrode rod. Fake and shoddy electrode rods have abnormal materials that cannot withstand high temperatures and different sizes. In this case, not only the life of the electrode rod itself will be shortened. It is very short, and because it may cause the discharge voltage to be unstable, it will bring a burden to the power device inside the fusion splicer, and even cause damage.

Fiber Cleaver Blade
Optical fiber cleaver is a special tool for cutting optical fiber, and its core component is the blade. A very important step before fiber splicing is fiber cutting. The flatness of the cut fiber end face will have a great impact on the fusion strength and fusion loss. The most important thing is to achieve the precision of smooth as mirror and smooth as new.

 

Jilong Fiber Cleaver Blade


Jilong's JBL-16 and JBL-23 blades are both made of imported tungsten steel raw materials, which are extremely hard after refining and processing, and the cutting angle is ≤0.5°. They are very durable and can be cut up to 48,000 times. Its upgraded packaging also adopts a hanging hole design and a hard blister design. The bottom of the hard blister has buckles, which is convenient for users to reuse.

Optical fiber cleaver anti-counterfeiting blade


Anti-counterfeiting query of electrodes and blades
There is an anti-counterfeiting identification code on the back of the Jilong electrode and blade packaging bag. Just scratch off the bottom coating to check the anti-counterfeiting code, and search in the official account to verify the authenticity.

 

Jilong product anti-counterfeiting query method


A product needs to go through research, design, production, logistics... and other links to reach the user. A qualified packaging design not only protects the product from damage, but also displays the function and characteristics of the product through the packaging. , and can also reasonably integrate various accessories together to provide good operation guidance. In order to let you buy and use with peace of mind, Jilong Communication will always protect your rights of use.
[Note: The above product data are all obtained under the environment of 20 degrees in Jilong laboratory]